People experience dry or wet heat sessions using sauna heaters in a well designed room or building. They enjoy the steam and heat that these heaters create and which also perspires. Basically, two types of saunas are used which includes- conventional and infrared saunas. This modern era has transformed the use of chimneys to a new and easy to handle, sauna heaters which provide a benefit of convenience and clean operations. It is presumed that the maximum temperature that a particular Sauna Heater cannot exceed a maximum temperature of 194 Fahrenheit (90 degree Celsius). These rules have been made mandatory by CSA rules. These maximum temperatures are currently lower than room temperatures of Europe. For residential use, some controls have to be taken care of before using the sauna heaters. Sauna controls are required to have a maximum of 1-hour timer, plus a thermostat for measure control. There are also commercial saunas which can run longer than these widely used residential saunas, provided that there is an attendant on the premises that checks on premises. Gradually these residential saunas were provided with some measures printed over it as sauna controls. This measure proved to be a cost-saving measure taken by the heater manufacturer.With the flow of time came a new type of heater which was the infrared heaters. It was strictly presumed that the infrared design was not a sauna heater. The infrared heaters warm the surface it is pointing to, not the surrounding area. It has been noticed that that some companies selling these heaters are no longer using the term 'sauna heater' and now sell them as 'heat therapy units'. Also there were wood-fueled heaters which were not a subject to the same restrictions as traditional electric heater. to be duly noted there is no limit to its maximum temperature. These wood-fueled sauna heaters were strictly prohibited for use in a residence as it may affect their insurance. As seen on pool decks, wood-fueled sauna heaters were often used to heat a detached and separate sauna building. In a positive side, these heaters did not require electricity to operate. Some of the better quality wood-fueled heaters have a porcelain finish which is tough and durable, remaining attractive through years of use.It is also essential to use a correct and proper form of heater for a reviving sauna. People build personal saunas for heat bathing, and both sauna types-conventional and infrared saunas provide this facility. The general benefits of heat bathing are relaxation and stress reduction, sweating and relieving aches and pain. Both sauna heaters are relatively dry. The far-infrared tend to be close to normal house humidity levels and the conventional one will be dried until water is sprinkled over its rocks. The conventional sauna is the one which is helps the user to control both temperature and humidity. In infrared saunas you control the temperature but the humidity is whatever it is. While perspiring in either sauna a person can experience far relaxation.
Source : articlesbase.com
0 comments:
Post a Comment