If any industrial cooler manufacturer is consulted, then they will always know the way their products can be purchased and used effectively to save energy in varied terms and facilities. As the fuel and power prices are going up, it is essential to gain such tips in order to cut down energy bills. While most of the industrial coolers are highly cost-effective in comparison to air conditioning systems, a few steps like the following can lead to better power savings.
Not oversizing a cooler
Many times, facility owners go on purchasing oversized coolers that can take the peak load of cooling during extremely hot days. However, an industrial cooler manufacturer would always advise to buy a cooler that is of right size so more energy may be saved. If an oversized cooler is used, then there is hardly a time when it is used to its full capacity. On the other hand, a rightly sized cooler will run to take load to its full capacity and will be more efficient. Thus, it is beneficial to avoid exceeding the requirements of a facility or space.
Right placement or installation
Another helpful tip is to install or place coolers at a location that is shady and does not receive direct sunlight. An industrial cooler will consume more energy when it needs to cool hotter air from outside. Right placement will not only reduce the energy use, but will also improve the functionality of a cooler. Thus, one can save significantly on power costs.
Buying a green cooler
A green cooler is not green in colour, but is the one that keeps the environment green. In such coolers, evaporative technology is used for cooling the air. Moreover, such coolers do not contain harmful refrigerants. In addition, they are manufactured in eco-friendly economical ways. Since green coolers are energy-efficient, they can save more power than a non-eco-friendly cooler or air conditioner can do.
Regular maintenance of coolers
At large facilities, industrial coolers soon collect dust and debris. When the fins get dirty, air flow is affected. To achieve the same level of cooling, more energy is required. This reduces the efficiency of coolers and increases the running cost. To retain the performance of coolers, it is necessary to give them regular maintenance. Thus, timely inspections by trained technicians should be done to detect and correct any troubles with the parts or functioning of coolers.
Source : articlesbase.com
0 comments:
Post a Comment