An automotive power system is not extremely complicated and a lot of advanced technologies are being used these days. But still, some find problems in various tasks such as hooking up jumper cables, probably because they have known that doing it improperly can cause serious damage, and even battery explosion.
There are a lot of myths and rumors associated with the automotive technology and the dangers related to hooking up jumper cables or exploding a car battery. But if you take some time to know and understand about the reasons behind car battery explosion, then you will find no problem you will have to worry about.
Securely connecting jumper cables or a battery charger
By following some simple rules you can safely connect jumper cables. Before using your vehicle to give a jump start, accept a jump from somebody else, or hook up a charger to your battery, the first thing you should do is check your owner's manual to make sure your vehicle does not have any other designation connection points other than your battery. To connect the jumper cables safely depends on how properly you connect the electrical system of the donor vehicle that has a good battery to the electrical system of a vehicle that has dead battery.
Also, you should keep in mind that positive terminal needs to be connected to positive and negative needs to be connected to negative. Otherwise, your car can be damaged and the battery can create hazardous sparks.
Below some simple steps are mentioned for safely hooking up jumper cables:
· The car that has good car battery and the car that has the dead battery, the keys of the both cars should be in the "off" position.
· Take the jumper cable and connect to the donor battery's positive terminal. The same cable should also be connected to the dead battery's positive terminal.
· Take another jumper cable and connect it to the donor battery's negative terminal. Connect its other end to the frame of the car with the dead battery or the bare metal on the engine.
· If you connect the battery charger, then do not take any further stress, because the process is same, except instead of a donor battery, you are utilizing a charger.
In most of the car's electrical systems, negative is ground. Therefore, you can connect a jumper cable or a charger to the car's engine or the bare metal on the frame and have a current flow into the battery.
Preventing car battery explosion
By charging carefully, jumping and following proper maintenance methods, you can avoid car battery explosion. If you hook up the negative jumper cable to the power unit, the spark can be occurred. First turn it on or plug it in after making the connection.
Car battery explosion is associated with hydrogen gas. If you do not maintain the battery properly, you allow the electrolyte level to drop, the lead plated to be exposed to oxygen. So after this, whenever you crank the starter motor the plates get flexed and touched during the excessive current drain. The hydrogen in the cell gets ignited and it causes battery explosion.
Hope you find this post useful. Break all the myths that are present in your mind and start maintaining your car battery properly. This way, there is nothing that can stop you from having trouble-free driving experience.
Source : articlesbase.com
0 comments:
Post a Comment