Do Everything You Can To Protect Your Refrigeration Equipment in UAE

Refrigeration equipment in UAE is not only expensive, but due to the harsh climatic conditions, can also be expensive to maintain and repair. The worst of these situations is when your refrigerator breaks down and needs to be repaired and/or have its parts replaced. Repairs and replacements place the heaviest burden upon your wallet. This sum can rise significantly if you own more than one refrigerator, or if you own a business or facility that requires the running of a considerable amount of refrigeration equipment in UAE. In that case, the best thing to do is to take care of your refrigeration equipment in the best way possible, and the easiest and most reliable way to do that is by performing regular preventative maintenance on your refrigeration products. If you already own a great deal of refrigeration equipment in the UAE and you find that it is constantly breaking down, you are probably only performing emergency service on it. That is, you are waiting for problems to occur before you start taking care of your equipment. This usually results in constant problems and breakdowns. This is a maintenance rule for everything from HVAC equipment to PPR pipe fittings. Since the entire range of information available on preventative maintenance for refrigeration equipment is very wide, this article will focus on how to keep a single crucial component - the condenser - reliable and operable for as long as possible. As a general rule, condensers need to be provided with the right inspection and maintenance every 6 months. If you are using heavy duty refrigeration equipment in UAE or are the owner of a large plant or facility that handles and transports products that require constant refrigeration, it becomes all the more important that your condensers get maintenance done every six months. Residential refrigerators do not require stringent care, an annual inspection will work just fine. 1. Clean and wash out your condenser coil: Every six or so months, clean out your condenser(s) with a vaccuum cleaner or brush. You can also use pressurized air and water, or commercial coil cleaning foams. Take care that the cleaning foam you use is not acid based, and follow the instructions very carefully.

2. Inspect the working of the condenser fans: These need to operate correctly for best functionality. When doing this, make sure that each fan is rotating fully and easily. Tighten all the connections and screws for each fan, and then proceed to check the blades themselves for any signs of wear and tear. If there is more discernable wear and tear than expected, replace the fan blade. Sometimes the condenser motor can also be accessed (though it is usually sealed). If its the former, than lubricate the motors and check for wear and tear. Replace the motor if it is worn out.

Once the maintenance is done, fill out a log of what you maintained, what you checked, fixed, or noted down for future replacement or observation. This will make the entire process more efficient, and if you need to call an expert in, you might save both time and money.

Source : articlesbase.com