How to Apply Car Touch Up Paints Easily?

It is always a smart choice to repair and groom your car, automobile, bikes and other scraps by yourself. The idea is not only easy on your pockets but also panders to your artful instincts. Markets flooding with a variety of auto touch up paint, mending chipped paint, scratches have made it easy to prove your mettle in taking care of what the world consider as 'scrap'. But before that you need to be

artful in the using those techniques of applying touch-up paints. Follow the steps below to manifest the expert in you:

 

Step 1 -

Match and Get the Right Color : 

Make sure before you rush to your paint brushes, you have the right color in hand, else in no time the entire effort of repairing may jeopardize. It is ideal to match the color with a section of area to be re-painted. Consult your local dealer to get insights over colors available in the market. For example, to choose a color in between black and white, you need to be aware about the color codes available and get the desired color. Also, some brands use special genre of colors. Therefore, Ford's Red will not be same as Hyundai's Red.

 

Step 2 -

 

Look for all scratches and scuffs :

It is wise and cost-saving to not go for entire car repairing for minute scratches. Find all such areas where repairing needed. If you have Car Scratch Repair Kits handy, it is more than enough to deal with minute detailing like a pro. If the object is dry it will be easier for you to find shortcomings and to your surprise many unexpected areas will be identified that need to be painted/repaired.

 

Step 3 -

The Preparation :

Once you are done with the right color, and identified areas, the preparation starts. Before painting any exterior you need to make right efforts so that the color stays for long. Make sure the car is completely clean and dry. Clean car will make it easy for you to sand the problem areas. Start with scaling off the damaged area where paint is needed to be applied. Use sand paper for the process and stop once you have clean and smooth area. Sandpaper, 'Nick sander' is useful in handling intricate areas that need much detailing.

 

Step 4 -

Start with Primer :

In short and smooth strokes apply coat of primer or base paint. It is important you buy good quality primer as it will be responsible for holding secondary paint of the object. Pay special attention to finishing as far as larger repairs and huge surface area is concerned. Carefully follow the directions mentioned on the bottle of primer paint as application may vary brand to brand.

 

Step 5 -

Apply Paint :

At the time of applying paint, watch for the kind of applicator you are using. Keeping in mind the surface area, choose your applicator- pen, brush or bottle. It is wise to try your hands on dummy before you go for the actual object. Begin with small and fast strokes in even patterns, keep overlapping till you get smooth surface. Note: Use quick dry touch-up paints so that overlapping does not smudge subsequent coats.

 

Step 6 -

Apply Wax :

Once you are done with painting the required area, it is ideal to apply coat of wax for perfect finish and smooth texture. Applying car wax also enhances longevity of paint and protects it from adverse weather conditions, in case the object is exposed to atmosphere.

Source : articlesbase.com